Portable Power Station IVT PS-1200, 1200 W

Power to go anywhere and anytime – 230 V, 12 V, 2 x 5 V USB Plug & Play complete solution

Features & Functions

Rechargeable with solar power, in the car and on 230 V mains voltage

Flexible rechargeable The battery can be charged flexibly: while driving in the vehicle using an integrated 12 V charging booster, absolutely independently via solar power thanks to the built-in MPPT plus + 20 A solar controller or at any 230 V socket with the included SH-3.150 10 A battery charger. The charge level of the lithium battery can be read on your smartphone via a Bluetooth interface and a free app. The data (including state of charge, current, voltage, temperature) of the battery management system can be exported and processed externally. The app is available for Android and iOS systems. Average charging times of the Power Station PS-1200 Charging facility Charging time Charging booster 12 V in the car 10.0 h 1 x solar modul Phaesun 200 W*) 6.4 h Battery charger 12 V, 10 A 10.0 h *) with optimum irradiation Note: The battery charger and the connection cables for the booster and solar modules are included in the scope of delivery.

Secured current draw: 230 V, 12 V and 2 x 5 V USB load outputs

Secured current draw via 230 V safety socket Connected to the 230 V AC output of the digital sine wave inverter, a pure sine wave alternating voltage can be taken safely. Thanks to galvanic isolation of the input and output stage, no additional fuse protection is necessary when connecting a consumer, even in the commercial sector. The peak output power, which is twice as high (2 s), ensures that even loads with high starting currents can be connected safely and without interference. Please note: If a multiple socket outlet is connected and several 230 V consumers are used at the same time, the professional associations stipulate that each additional consumer must be protected with a separate RCD or DI circuit breaker. Please obtain information from your professional association or on the Internet at: www.dguv.de Secured current draw via 12 V DC socket The 12 V DC output is controlled via the MPPT plus + solar controller. This enables reliable power consumption – even when you are not personally on site, e.g. for operating alarm, lighting or cooling systems in warehouses, allotment gardens, holiday homes or boats, as well as in agriculture for pasture fencing or pumps and much more. Secured current draw via the two 5 V USB ports (type A) In addition, two smartphones, tablets, notebooks, battery packs, LED lights and many other small devices can be reliably charged at the two 5 V USB outputs. The switchable load outputs can be used simultaneously. Charging is possible while the current is being drawn.

Average operating time of electronic devices with the Power Station

The operating time of the Power Station PS-1200 can vary greatly depending on which loads are connected. If you operate consumers with lower power, the operating time is extended. If you use several outputs at the same time, it is shortened accordingly. Average operating time for electronic devices with the Power Station PS-1200 230 V consumer Operating time 50 W (e.g. laptop charger) 25.6 h*) 140 W (e.g. e-bike charger) 9.1 h**) 600 W (e.g. drill) 2.1 h 1200 W (e.g. electric kettle) 1.0 h 12 V consumer Operating time 50 W (e.g. TV set) 25.6 h 120 W (e.g. compressor) 10.6 h *) Enough for approx. 12 recharges of a laptop battery **) Corresponds to 3 – 4 recharges of a 36 V / 11 Ah e-bike battery

Robust housing with sturdy carrying handle

The valuable inside of the power station is protected by an extremely robust metal housing. The corners are additionally reinforced with edge protection. The sturdy carrying handles make it easy to transport to the place of use.

Powerful 12.8 V LiFePO4battery, 100 Ah with app function

The Power-Station is equipped with a powerful, lightweight and long-lasting 12.8 V, 100 Ah special LiFePO 4 battery. This powerful special LiFePO4 battery offers considerable advantages compared to lead batteries with a comparable storage capacity: Twice the usable capacity a weight saving of approx. 65% and last but not least an extremely long service life (> 6000 cycles at 80 % depth of discharge) compared to lead batteries (up to 550 cycles at 50 % depth of discharge).

Individually configurable according to your needs

Individual equipment for your application The Power Stations can be adapted to your needs on request. On request, individual components of the existing Power Station can be exchanged, omitted or additional ones installed, e.g. Inverter (capacity and type) Battery (capacity and type) Charger (amperage) Size of the box Cable lengths and much more. We will be happy to advise you.

Extended manufacturer warranty

Electronic devices LiFePO 4 battery IVT products are manufactured to the highest quality and according to strict quality guidelines. Therefore, we are so convinced of the longevity of our products that we extend the legally required manufacturer's warranty free of charge: 3 years on electronic devices, 8 years on LiFePO 4 batteries.

Delivery content

Power Station PS-1200 (fully equipped) Battery charger SH-3.150, 12 V, 10 A incl. mains cable and adapter, 3.3 m Connection cable for solar module, 4 m, H07RN-F 2 x 2.5 mm 2 (max. 50 V/20 A) Connection cable for charging booster for 12 V car socket, 2.5 m, 2 x 1.5 mm 2

Digital sine wave inverter DSW-1200, 12 V, 1200 W

Digital sine wave inverter IVT DSW-1200, 12 V, 1200 W Item no. 430105 To the product > Absolutely self-sufficient thanks to real sine wave AC voltage The high-quality digital sine wave inverter DSW-1200 reliably and precisely converts an input voltage of 12 V DC into a real sine wave AC voltage of 230 V/50 Hz. Independent of the public power grid, even sensitive consumers as well as devices with high starting currents can be supplied with power safely and without interference. The most important features and characteristics Output voltage: Real sine wave alternating voltage 230 V/50 Hz Continuous output power 1200 W High peak output power 2400 W Galvanic isolation of input and output stage Power start function for loads with high starting current Switchable power saving functions (sleep, standby) Dynamic deep discharge protection Extensive protection functions

LiFePO4battery 12,8 V/100 Ah

LiFePO 4 Premium Batterie FORSTER 12,8 V/100 Ah 200 A-BMS-2.0 | F12-100XB1 Item no. 920040 To the product > Extremely resistant, robust and lightweight The installed LiFePO 4 battery is extremely robust, economical and, thanks to its optimized design, lighter and smaller than conventional lead batteries. Further advantages of the premium battery series High cycle stability Short charging times Incl. 200 A high-load power BMS Incl. 500 mA Smart measuring shunt and app operation Low self-discharge High heat tolerance Built-in complete "Safety First" protection

Charging booster 12 V, 30 A

IVT Charging booster 12 V, 30 A Item no. 920033 To the product > Optimum charge The integrated charge booster serves to optimally charge the installed battery. The charging booster is supplied preset (battery type and charging current). The set 10 A mode prevents the socket in the vehicle from being overloaded. Once the end-of-charge voltage has been reached, the charge booster switches to trickle charging.

Solar controller MPPTplus+12 V/24 V, 20 A

Solar Controller MPPT plus + IVT 12 V/24 V, 20 A Item no. 200036 To the product > Highly developed solar charge controllers of the latest generation Thanks to the MPPT function ( M aximum P ower P oint T racker), the most effective use of solar power from the solar modules is always guaranteed. The high efficiency (max. 97 %) and the significantly shorter battery charging times enable the best possible power utilization of your solar system. The most important characteristics and features MPPT charging process: highly efficient, fast, battery-friendly Multi-stage charging technology Microprocessor-controlled charging Automatic temperature compensation High efficiency max. 97 % Switchable load output Switchable standby function Extensive protective functions

Battery Charger Staudte Hirsch SH-3.150, 12 V, 10 A

Battery charger Staudte Hirsch SH-3.150, 12 V, 10 A Item no. 331500 To the product > Facial charging with the help of fully automatic 10 A battery charger The fully automatic battery charger SH-3.150 is designed for gentle charging and optimum maintenance of 12 V lead and 12 V calcium batteries as well as 12 V lithium batteries (LiFePO 4 ) with integrated battery management system (BMS). The most important features and characteristics Suitable for 12 V lead-acid and calcium batteries from 20 Ah upwards Suitable for 12 V lithium batteries with BMS from 25 Ah Multi-stage, microprocessor-controlled charging process Adjustable charging modes (AGM, acid/gel, lithium and calcium/boost) Regeneration mode for deeply discharged batteries Trickle charge and auto memory function Protection against short circuit, reverse polarity and overcharging Clear operating and display panel Easy operation via one button Jet-proof and dust-proof housing (IP 65) Charging adapter for PS-1200 with XLR connector Additional benefit The charger can also be used for charging various vehicle batteries. The charging adapters with battery clamps and ring lugs are also included.

Technical Data