Electricity to take away - Power to go Pure sine wave AC voltage on the go
Features & Functions
Pure sine wave alternating voltage 230 V/50 Hz
The Power Station PS-300 provides a true sine wave output voltage of 230 V/50 Hz With this pure sine wave voltage, even sensitive consumers such as computers, TV, audio systems, laptops, electronic tools can be operated safely and without interference.
Microprocessor controlled electronics
The microprocessor-controlled electronics automatically monitor and regulate the most important operating parameters such as input voltage and frequency. This ensures the constant stability of the output voltage.
Continuous power 300 W – peak output power 600 W
Especially for consumers who need a high inrush current (for example, pumps, compressors, or cool box), starting does not always go smoothly. For this reason, the Power Station is designed to provide twice the continuous output power in the short term.
Power start function for consumers with high inrush current
The integrated sine wave inverter is also equipped with the power start function. Advantage: Consumers with high switch-on or starting current are actuated shortly after each other several times with maximum output power of the inverter, thus facilitating a reliable start-up of powerful consumers.
Extensive protection functions for both load outputs
The Power Station works absolutely reliably and safely even under the toughest conditions. As standard, the two outputs (230 V AC and 12 V DC) are independently protected against overload and short circuit. An impending deep discharge of the battery is indicated by visual warning (LED) at both load outputs and prevented by automatic shutdown. In the event of overtemperature, the integrated inverter switches off automatically.
Safe and functional: 12 V DC and 230 V AC load output
The Power Station is equipped as standard with a 12 V DC and a 230 V AC load output. The two outputs can be used separately or simultaneously. Plug type F, C For power take-off you have a 230 V earthed socket, suitable for the plug types C (Euro plug) and F (Schukostecker®) available. 12 V DC In addition, the Power Station is equipped with a 12 V DC output connection.
Operation and display elements
1 230 V AC output 2 12 V DC output 3 Separate switches for outputs 4 Separate status LEDs for outputs 5 Fuse for 12 V DC output 6 Charging sockets for car and mains charging 7 Mains Charger SH-3.170 with barrel connector 8 12 V DC car charger adapter
Average operating time for electronic devices with the Power Station
The operating time of the PS-300 Power Station can vary widely depending on which loads are connected. For a fully charged battery, it will last approximately 30 minutes at 300 W (230 V AC output) or approximately 85 minutes at 10 A (12 V DC output). If you operate consumers with lower power, the operating time is extended accordingly. If you use both outputs at the same time, it shortens accordingly. Average operating time for electronic devices with the Power Station Consumer Operating time Commercially available televisions with a screen diameter of 102 cm approx. 3 h Stereo systems with subwoofer approx. 3 h 40 W lighting approx. 3 h Flash unit with 180 Ws about 900 flashes
Robust case with sturdy carrying handle
The valuable interior of the Power Station is protected by an extremely robust metal housing. The corners are additionally reinforced with an edge protection. The sturdy carrying handle facilitates transport to the place of use.
Powerful 12 V AGM battery, 20 Ah
The Power Station is equipped with a powerful and reliable 12 V, 20 Ah AGM (Lead Vies) battery. Of course we offer a suitable replacement battery for this high quality device. Suitable AGM battery, 12 V, 20 Ah für Power Station PS-300 Item no. 1.3128 To the product >
3 year manufacturer warranty
IVT products are manufactured to a high quality and following strict quality guidelines. We are certain about the longevity so that we add another year to the statutory manufacturer warranty free of charge. Rechargeable batteries and batteries are excluded from this warranty.
Delivery content
Power Station PS-300 230 V mains charger 12 V car charger Operation instructions in DE, GB, FR, NL
Technical Data
| Parameter | Value |
|---|
| Battery type | AGM battery, 12 V, 20 Ah |
| Charging via 230 V mains | Input: 100 - 240 V ACOutput: 14.4 V DC, max. 2 A |
| Charging via 12 V mains | 12 V DC, 12 - 14.4 V DC,max. 5 A |
| Output connector | 1 x shock-proof socket |
| Output voltage(-8 % / +5 %) | 225 V AC |
| Frequency | 50 Hz |
| Waveform | Pure sine wave |
| Continuous output current | 1,4 Aeff |
| Continuous output power | 300 VA |
| Peak output power | 600 VA |
| Power factor | cos phi > 0,8 |
| Run time max. | 85 min. at 10 Aand full battery charge |
| No-load current | 15 mA(with active output) |
| Deep discharge protection | yes |
| Overload shutdown | yes |
| Output | 1 x 12 V car socket |
| Output current max. | 10 A |
| Idle current | 4 mA(with active output) |
| Fuse | T 10 A(accessible from the outside) |
| Dimensions (L x W x H) | 240 x 145 x 215 mm |
| Weight | 10.4 kg |
