Victron Energy 16A/250Vac (2p/3w) shore power connector plug

Victron Energy 16A/250Vac (2p/3w) shore power connector plug
Item number: 
SHP301604000
Victron Energy 16A/250Vac (2p/3w) shore power connector plug
Victron Energy 16A/250Vac (2p/3w) shore power connector plug
Item number: 
SHP301604000

Safe and reliable shore power connection for 16A loads

This 16A / 250Vac rated, two-pole, three-wire connector plug is the ideal solution for connecting boats, houseboats, RVs, camping, and mobile power supply systems to shore power. It is designed to provide a stable and safe connection between the onboard electrical network and the shore electrical system over the long term.

Main features and benefits

  • 16A rated current at 230–250V AC voltage
  • 2 pole + protective conductor (3-wire) design
  • Reinforced, durable housing for high demands
  • Safe, vibration-resistant contacts for stable connection
  • Easy installation with well-accessible cable connections
  • Suitable for outdoor use when used with a properly protected socket

Application areas

The plug design is specifically tailored for mobile power supply tasks where a reliable and safe shore power connection is needed. Ideal for:

  • Connecting sailboats and motor yachts to shore power,
  • Powering RVs and caravans in campsites,
  • Power supply for temporary outdoor events and service points,
  • Connecting workshops, service points, mobile tools, and equipment.

Technical specifications overview

  • Rated current: 16A
  • Rated voltage: 250Vac (for single-phase networks)
  • Pole distribution: 2P + PE (phase, neutral, protective earth)
  • Number of wires: for 3-wire cable
  • Connection method: screw or crimp contacts depending on type
  • Compatibility: with standard shore power sockets

Safety and protection

Connecting to shore power always requires increased attention, as we are directly conducting network voltage into the onboard or mobile electrical system. This plug is designed to provide the highest level of safety during use:

  • Solid, enclosed housing against accidental contact and mechanical damage.
  • Proper touch protection when used with standard, protected sockets.
  • Safe cable fastening that prevents wires from being pulled out.
  • Support for proper circuit protection (circuit breaker, RCD).

Easy installation and wiring

The plug design emphasizes easy and quick wiring. The cable entry and fastening, as well as the connection of the contacts, are logically structured and easy to understand, making it manageable for electricians and experienced end-users alike.

  1. After disassembling the housing, clean the cable and strip the wires.
  2. Connect the phase (L), neutral (N), and protective earth (PE) wires to the appropriate terminals.
  3. Mechanically secure the cable to prevent pulling stress.
  4. Reassemble the housing and visually check the connection.

Always de-energize before wiring, and if unsure, leave the installation to a qualified electrician.

Why is the quality of shore power connectors important?

The quality of the shore power connector plug directly affects the operational reliability of the entire system. A poor-quality, poorly assembled connector can lead to contact failure, overheating, or even fire hazards. A reliable, properly sized 16A/250V connector:

  • reduces voltage drops caused by loose contacts,
  • ensures stable, long-term operation of the circuit,
  • protects consumers and onboard electronic devices,
  • complies with relevant electrical safety regulations.

Compatibility and integration into systems

The plug is designed for standard single-phase, 230–250V AC systems, with a maximum load of 16A. It integrates well with systems where:

  • onboard chargers, inverters, and battery charging systems are installed,
  • the shore power socket is designed for outdoor use with adequate protection,
  • the circuits are equipped with overcurrent and current protection switches.

A reliable connector is particularly important in systems where sensitive electronic devices, onboard computers, navigation devices, or heating/cooling systems operate.

Ideal choice for boating and camping

Whether connecting to shore power in a marina, drawing power in a campsite, or operating mobile tools, this 16A plug provides a reliable and safe connection. Its durable design and easy installation ensure a stable solution for both professional and hobby users over the long term.

RRP: Online price: 102.67
Online price: 84.87
Savings 17.80 €
Bundle offers
Victron Energy 16A/250Vac (2p/3w) shore power connector plug
Victron Energy 16A/250Vac (2p/3w) shore power connector plug
RRP: Online price: 102.67
Online price: 84.87