HTRC P20 12V/24V 20A Intelligent Charger for AGM GEL PB LiFePo4 Batteries with Crocodile Clips

With HTRC chargers, you are always supported during work: a precise and reliable choice.

【One-Button Start】The 12V 20Amp, 24V 10Amp battery charger has four modes that can be started with a single button press, providing a maximum charging current of 20A for fast charging of the battery. It features accidental touch protection, automatically locking after 10 seconds of starting the charge to prevent accidental contact. Thanks to its small size, it is a portable car battery charger.

【3-Level Adjustable Current】With the car battery charger, you can choose the appropriate charging current, selecting from (12V/5A, 24V/3A) → (12V/10A, 24V/5A) → (12V/20A, 24V/10A). Please select the current strength that suits your needs for charging the battery.

【Wide Application Area】The trickle charger can be used for various types of batteries, such as lithium, LiFePO4, lead-acid (PB/AGM/GEL/EFB, MF, FLOODED, VRLA, SLA, wet batteries). It can be applied to cars, golf carts, motorcycles, electric motorcycles, motorboats, lawn mowers, forklifts, tractors, etc. Only lithium batteries with BMS can be charged!

【Trickle Charging & Maintenance/Pulse Repair】The maintenance/pulse repair function activates the battery, and the unique battery protection function allows for fast and safe charging, while trickle charging provides perfect final protection for fully charging the battery.

【Temperature Sensing & Multiple Protection】It has a built-in temperature sensor, capable of charging normally from -10°C (14°F) to 40°C (104°F). It is equipped with various built-in protections, such as temperature protection, low voltage protection, overvoltage protection, short circuit protection, overcurrent protection, and electrostatic spark protection. This allows for worry-free charging.

We provide a 1-year warranty.

20 Amp Smart Battery Charger
Question 1: Is it not reaching the maximum charging current?
For battery protection, the system automatically identifies the battery voltage and selects the most appropriate current for charging the battery. When the battery voltage is low (for example, if the voltage of the 12V battery is less than 11V), the system automatically charges the battery with the maximum current. (Charging current can be adjusted in 3 levels, high current, fast charging)

Question 2: Is the LiFePO4 battery not fully charged?
When the battery is fully charged, it has a recall function that reduces the charge by about 1V, which is normal. It adds a smaller current after full charge for continuous charging.

P20 Specifications:
Input voltage: 100V / 240V~ 50/60 Hz.
Output voltage: 12V/24V. Lithium /LiFePO4/ lead-acid (AGM, GEL, EFB, MF, Flooded, VRLA, SLA, and wet batteries..).
Output current: 12V20A & 24V10A
Supported Ah: 2AH-300AH, larger capacity is also possible, larger capacity requires longer charging time.
Minimum starting voltage>1.0 V
Power and load: MAX; 280 W
Size: 158 x 90 x 50 mm (6.22 * 3.54 * 1.97 inches)
Net weight: 520g

Diagram of different charging states:

Charging voltage & Current: Real-time display of voltage or current
Repair Mode: Repairing the battery
Temperature:

Winter. when the temperature is below -10°C (14°F), it increases the charging voltage
Summer. when the temperature is above +40°C (104°F), it decreases the charging voltage

Test Mode: When the battery is nearly fully charged, it automatically continues to charge the battery in trickle mode.
Full Charge: When the battery is fully charged, "FULL" appears
Low Voltage: The battery voltage is too low, or it cannot hold energy

Package Contents:

1X 20A car battery charger

1x 3M extension power cable

1x Cable clip

1x manual (English, German, French, Italian, Spanish)